Quick answer: Both options protect carton clamp pads that see heavy contact with pallets and floors. Rightline Armor Plate adds a hardened steel shoe that wraps the bottom of each pad, so the steel takes the wear instead of the aluminum. Cascade Talon Pads replace the pad face with short rubber-faced segments on a steel frame, so you swap only the worn sections instead of the whole pad.
Rightline Armor Plate
A T-1 steel shoe that guards the bottom of each aluminum pad.
- Covers the full underside of the pad
- Also covers the lowest 7" front and rear
- Replaceable triangles in rubber or aluminum
- Diamond Plate version available
Cascade Talon Pads
Segmented pallet wear pads for carton clamps used in pallet work.
- Rubber-faced aluminum pad segments
- High-strength steel lower frame and retainer bars
- Segments rotate, reposition or replace one at a time
- Sized for 40" to 60" pads
Why carton clamp pads wear out
A carton clamp is built to squeeze cartons, appliances and other boxed loads. In many warehouses it also handles palletized loads. That is where pads take a beating. The bottom edge of each pad drags across pallets, floors, dock plates and trailer decks, and the lower corners hit pallet boards on almost every pick.
A standard pad is rubber-faced aluminum. Once the bottom edge is chewed up, the rubber tears and the aluminum gets gouged or bent. Left alone, a damaged pad grips unevenly and can damage the very product the clamp is supposed to protect. Repairing it usually means a new pad face or a full pad. Armor Plate and Talon Pads are two different answers to the same problem.
Rightline Armor Plate
Rightline's Armor option, often listed as Armor Plate, adds a steel shoe to each pad. According to Rightline, the shoe is made of T-1 steel and guards the entire underside of the pad plus the lowest 7 inches on the front and rear of each aluminum pad. Rightline describes Armor as patented.
- How it helps: The hardened steel takes the hits from pallets and floors, so the aluminum pad and its rubber face last longer.
- Replaceable parts: Rightline offers individually replaceable triangles in rubber or aluminum.
- Diamond Plate Armor: A version with a diamond pattern steel shoe, covering the same area: the full underside and the lowest 7 inches front and rear of each pad.
- Where it fits: Rightline offers Armor on its standard and tipping carton clamps. Its single-double clamp uses a related design called Switchblade Armor, with bolt-on replaceable parts.
Armor Plate keeps a full-length pad face, so the clamp keeps one continuous contact surface on the load.
Cascade Talon Pads
Cascade calls Talon Pads "replaceable, segmented pallet wear pads." They are made for carton clamps used in pallet applications. Instead of one long pad face, the pad is built from shorter sections:
- Pad segments: Rubber-faced aluminum upper pads with larger, harder rubber faces for a secure grip.
- Frame: A high-strength steel lower frame and steel retainer bars.
- Service: Each segment can be replaced on its own by removing one retainer bar. Segments can also be rotated or moved to get the full life out of them.
- Sizes: Cascade lists Talon Pad packages for 40", 42", 48", 52", 54" and 60" pads.
The idea is to cut downtime and parts cost. The ends of a pad usually wear first, so with Talon Pads you replace only those segments, not the whole pad.
Side-by-side comparison
| Rightline Armor Plate | Cascade Talon Pads | |
|---|---|---|
| Approach | Steel shoe protects a standard pad | Segmented pad replaces the standard pad face |
| Wear material | T-1 steel shoe (diamond plate optional) | Steel lower frame, rubber-faced aluminum segments |
| Area protected | Full underside plus lowest 7" front and rear | Lower frame, with individual wear segments |
| Pad face | One continuous pad face | Short segments, larger and harder rubber |
| When it wears | Replace triangles (rubber or aluminum) | Rotate, move or replace single segments |
| Best for | Rough pallet and floor contact where you want to keep the original pad | Pallet work where pad ends wear fast and quick swaps matter |
Specs and part options vary by clamp model and pad size. Details above come from each manufacturer's published product information.
Which one should you choose?
- Your clamp spends most of its day on pallets: either option beats a standard pad. Choose based on the clamp brand you run and how you prefer to service it.
- Pads get hit hard by floors, dock plates and pallet boards: Armor Plate puts hardened steel where the impacts happen.
- You want to replace small sections fast: Talon Pads let you swap a single worn segment.
- You handle mostly cartons and appliances off pallets: a standard rubber-faced pad is usually enough.
Not sure which clamp setup you need? See our guide to choosing a carton clamp and our guide to attachment capacity.
Frequently asked questions
What is Armor Plate on a carton clamp?
Armor Plate is Rightline's Armor option: a T-1 steel shoe that covers the underside and the lowest 7 inches front and rear of each aluminum pad, protecting it from pallet and floor damage.
What are Cascade Talon Pads?
Talon Pads are Cascade's segmented pallet wear pads. Rubber-faced aluminum segments sit on a steel frame, and each segment can be replaced by removing one retainer bar.
Can I add Armor Plate or Talon Pads to an existing clamp?
It depends on the clamp model and pad size. Call us with your clamp's model number and we'll tell you what fits.
Do these options reduce product damage?
Indirectly. Pads that stay in good shape grip evenly. Worn, torn or bent pads are a common cause of crushed or scuffed cartons.
Need a carton clamp?
AttachCo rents and sells reconditioned carton clamps, including units with Armor Plate, shipped nationwide through your forklift dealer. Tell us your loads and forklift, and we'll match the right setup.